LiquiDam™ Moisture Mitigation

Formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1000 ft² per 24 hours or a maximum relative humidity of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1000 ft² per 24 hours.

delivers less than .1 permeability of water vapor through the membrane, exceeding the newly released ASTM F3010-13 standard for moisture vapor barriers.

• One-step, single coat application
• Can use with new concrete as little as 48 hours old (up to 100% RH)
• Penetrates to fill gaps and voids
• Install floor covering after as few as 4 hours
• No shot blasting for clean, sound concrete
• Low-odor, alkali resistant
• Contains low VOC
• Available in: 1 gallon kit