DryerJack Low Profile Scoop Design Roof Vents
All new for 2013, In-O-Vate Technologies unleashes the ultra-high efficiency DryerJack series of roof vents. This new generation of roof caps is engineered with intense focus on three critical aspects: zero backpressure, denial of access to birds and rodents and duct cleaning accessible; amenities not found on any other roof termination vent in the industry.
As close to perfect as a roof vent can get; In-O-Vate Technologies' boasts technologically advanced features that just aren't found on similar industry products.
• A damper design providing substantial defenses to bird and rodent entry
• Tuned design providing zero airflow resistance (no backpressure)
• Duct cleaning accessible
• Small footprint and low profile "scoop" design
• A watertight extended collar for secure duct docking
• Heavy 26 gauge Galvalume® metal construction
• Nailing flange with rounded corners and 6 nail holes
• Equally suitable for new construction or retrofit installation
• Superb workmanship and pleasant eye appeal
· Available in powder coated brown, black or white
The airflow conduit increases 63% (12.56 sq. inch opening to 20.5) through the DryerJack; this along with the curved damper provides zero inches of water column pressure in real-life testing. Note: Not recommended for use with high to medium-high profile roof tiles like Barrel, Spanish S or S-Tile.
As close to perfect as a roof vent can get; In-O-Vate Technologies' boasts technologically advanced features that just aren't found on similar industry products.
• A damper design providing substantial defenses to bird and rodent entry
• Tuned design providing zero airflow resistance (no backpressure)
• Duct cleaning accessible
• Small footprint and low profile "scoop" design
• A watertight extended collar for secure duct docking
• Heavy 26 gauge Galvalume® metal construction
• Nailing flange with rounded corners and 6 nail holes
• Equally suitable for new construction or retrofit installation
• Superb workmanship and pleasant eye appeal
· Available in powder coated brown, black or white
The airflow conduit increases 63% (12.56 sq. inch opening to 20.5) through the DryerJack; this along with the curved damper provides zero inches of water column pressure in real-life testing. Note: Not recommended for use with high to medium-high profile roof tiles like Barrel, Spanish S or S-Tile.
Related Products
About the Brand
In the past, homeowners had to put up with the inefficient venting of their dryer appliance exhaust due to numerous friction causing bends or kinks in the flex duct hose that connects the dryer to the wall exhaust pipe. Lint build-up and a fire hazard are the unwelcome bi-products of these annoying bends. In order to accommodate these flow restrictive bends, the dryer appliance had to be located five to six inches away from the wall, taking away from valuable living area.
Today, you can place the dryer flush to the wall without crushing the exhaust hose or restricting airflow.
Today, you can place the dryer flush to the wall without crushing the exhaust hose or restricting airflow.
More Products from Dryerbox by In-O-Vate Technolo...
Ask Community